Are gas caps universal?

No, there are many different kinds of gas caps and you need to know what kind you have in order to replace it. Older model motorcycles have bayonet / cam-style gas caps (sometimes referred to as ¼ turn gas caps) that engage using a notch and a twist. Other gas caps are threaded and they screw into the tank. Not all manufacturers use the same threads so you need to find a gas cap that is made for your particular bike. It’s also important to note that some gas caps have vents that help eliminate vapor lock which can stop fuel from flowing properly.

Can a bad gas cap cause idle problems?

Yes. Most gas caps have vents. These one-way valves help allow air in so the gas flows out of the gas tank petcock. Just like the vent on the gas can you use to fill your lawn mower. If the vent is closed the gas comes out of the can very slowly. If you open the vent, the gas will flow out freely. If your vent is stuck or clogged then the gas will not flow out properly, which can cause a situation where your bike needs more fuel to run and simply will not due to lack of fuel flow. If the vent is completely stuck or clogged then your bike may idle for a while and then die. An easy way to test if this is your problem is to simply remove your gas cap and check if the motorcycle keeps running. An insufficiently sized vent or partially clogged gas cap vent can cause a bit of fuel starvation when riding at high speeds for extended periods, causing your bike to run lean, and not generate as much power.

What happens if you lose your motorcycle gas cap? Can you ride without one?

Yes, you can ride without your gas cap, but it definitely is a messy endeavor. Depending on your fuel level, gas will splash out of your motorcycle gas tank when you hit a bump. This combined with the wind will translate to you wearing most of the fuel that comes out of the tank. We highly advise against smoking if you have to travel without a gas cap for obvious reasons. When in a pinch, stuff a rag in the filler hole of your gas tank until you can get off the road and locate a new (or retrieve your lost) gas cap.

Why people often replace factory gas caps with after market ones?

People replace factory gas caps for a few reasons. Some factory gas caps rattle and this can be quite annoying, so people replace them. Another reason is because of poor design. A lot of riders wear gloves when they ride. Trying to open a factory gas cap with a smooth surface does not allow for much grip. Spinner gas caps and other designs are easier to grab with gloves on. Another reason is for security. Some people want to have a lock on their gas cap. This can help eliminate the risk of people stealing your fuel, or putting something into your tank. The most common reason is simply aesthetics. Pop-up gas caps are popular because they sit flush on the tank, and some people think they look cool. Sometimes a rider simply wants a different material or finish gas cap, such as a black or brass gas cap for Harleys. Changing out a stock gas cap for a custom one is a very quick and inexpensive process, and can add some personal style to a motorcycle.

Motorcycle Gas Caps

Sort by

Filters

Cycle Standard Bayonet / Cam Harley Style Vented 2" Gas Cap - Chrome
44 reviews $13.19

Cycle Standard Pop-Up Gas Cap - Black - Vented - for Harley 1996 & later
13 reviews $43.99

Cycle Standard Custom Small Flush Mount Pop-Up Gas Cap and Weld In Bung
53 reviews $71.49

Cycle Standard Screw-In Harley Stock Style Vented Gas Cap - 1996 & up - Chrome
34 reviews $17.59

Cycle Standard Custom Flush Mount Aluminum Pop-Up Gas Cap and Weld In Bung
22 reviews $71.49

Cycle Standard Custom Flush Mount Polished Stainless Steel Pop-Up Gas Cap and Weld In Bung
5 reviews $76.99

Cycle Standard Screw-In Harley Stock Style Vented Gas Cap - 1996 & up - Black
56 reviews $14.95 $17.59

Lowbrow Customs Domed Screw-In Gas Cap for Harley-Davidson 1996 & later - Brass
17 reviews $59.99

Lowbrow Customs Aluminum Gas Filler Cap with Weld-In Steel Bung - Vented
6 reviews $37.99

Lowbrow Customs Aluminum Gas Filler Cap - Vented
4 reviews $24.99

Lowbrow Customs Banded Screw-In Gas Cap for Harley-Davidson 1996 & later - Brass
23 reviews $59.99

Lowbrow Customs Finned Thread-In Gas Cap for Harley-Davidson 1996 & later - Polished
26 reviews $38.49

Lowbrow Customs Aluminum Gas / Oil Filler Cap - Unvented
4 reviews $19.99

Cycle Standard Domed Slim Black Screw-In Harley Style Gas Cap 1996 & up
38 reviews $16.82 $19.79

Lowbrow Customs Competition Screw-In Gas Cap for Harley-Davidson 1996 & later - Polished
28 reviews $38.49

British Standard Triumph / BSA / British Motorcycle Gas Tank Cap Made in the UK OEM # 83-3875
40 reviews $29.99

Lowbrow Customs Banded Screw-In Gas Cap for Harley-Davidson 1982-1995 / Modern Triumph Bonneville T100 / T120, Scrambler, Thruxton - Brass
5 reviews $59.99

Cycle Standard Bayonet / Cam Harley Style Vented 2" Gas Cap - Black
29 reviews $12.09

Cycle Standard Bayonet / Cam Harley Style Vented 2.5" Gas Cap - Chrome
8 reviews $20.56 $24.19

Lowbrow Customs Dished Screw-In Gas Cap for Harley-Davidson 1996 & later - Brass
15 reviews $59.99

Cycle Standard Pop-Up Gas Cap - Chrome - Vented - for Harley 1996 & later
10 reviews $38.49

Lowbrow Customs Brass Gas Filler Cap - Vented
7 reviews $32.99

Lowbrow Customs Banded Screw-In Gas Cap for Harley-Davidson 1996 & later - Aluminum
8 reviews $34.99

Lowbrow Customs Aluminum Gas / Oil Filler Cap with Weld-In Steel Bung - Unvented
4 reviews $32.99

Cycle Standard Domed Slim Chrome Screw-In Harley Style Gas Cap 1996 & up
15 reviews $16.82 $19.79

Lowbrow Customs Domed Screw-In Gas Cap for Harley-Davidson 1996 & later - Aluminum
9 reviews $34.99

EMGO Triumph / BSA / British Motorcycle Gas Tank Cap OEM # 83-3875
22 reviews $16.04

Cycle Standard Custom Flush Mount Chrome Pop-Up Gas Cap and Weld In Bung
4 reviews $60.77 $71.49

Lowbrow Customs Brass Gas / Oil Filler Cap with Weld-In Steel Bung - Unvented
5 reviews $39.99

Cycle Standard Pop-Up Gas Cap Large Diameter - Black - Vented - 1996 - Up Harley-Davidson
9 reviews $31.67 $39.59

Cycle Standard Bayonet / Cam Harley Style Non-Vented 2" Gas Cap - Chrome
$21.77

Lowbrow Customs Brass Gas Filler Cap with Weld-In Steel Bung - Vented
8 reviews $44.99

Cycle Standard Pop-Up Gas Cap Large Diameter - Black - Dummy - 1996 - Up Harley-Davidson
1 review $28.70

Lowbrow Customs Brass Gas / Oil Filler Cap - Unvented
8 reviews $27.99

Lowbrow Customs Dished Screw-In Gas Cap for Harley-Davidson 1996 & later - Aluminum
4 reviews $34.99

Lowbrow Customs Domed Screw-In Gas Cap for Harley-Davidson 1982-1995 / Modern Triumph Bonneville T100 / T120, Scrambler, Thruxton - Brass
7 reviews $59.99

Cycle Standard Screw-in Style Gas Cap Gasket replaces Harley-Davidson OEM #61109-85
14 reviews $2.48

Lowbrow Customs Competition Screw-In Gas Cap for Harley-Davidson 1996 & later - Black
29 reviews $32.72 $38.49

Cycle Standard Bayonet / Cam Harley Style Vented 2.5" Gas Cap - Gloss Black
5 reviews $21.77

V-Twin Manufacturing Large Diameter Chrome Bayonet Gas Cap 1952-1970 Harley K Model Ironhead Sportster XL OEM #61103-52
11 reviews $19.95

Cycle Standard Dresser Style Screw-In Harley Style Vented Gas Cap - 1992 & Up - Black
$14.29

Lowbrow Customs Domed Screw-In Gas Cap for Harley-Davidson 1982-1995 / Modern Triumph Bonneville T100 / T120, Scrambler, Thruxton - Aluminum
1 review $34.99

Cycle Standard Reproduction Long Skirted Eaton Style Bayonet / Cam Style Vented Gas Cap - Chrome
23 reviews $24.19

STAY CONNECTED
WITH LOWBROW

NO SPAM, EVER. JUST GREAT STUFF. YOUR INFO IS NEVER SHARED.