Finally

haven’t installed yet, but I’ve had to remove the bowl before and couldn’t do it, lack of tools.

Float Bowl Screws

Great!! Works like they were designed to. I'll be getting more for my other bikes.

Awesome accessory

Makes accessing the float bowl so much easier.

Carb bolts

Thanks guys, makes it look better and much easier to service when needed.

2-3-21

Excellent, makes life easier

Cmc

Worked great made taking off and putting on the bowl muck easier

ABSOLUTELY FANTASTIC!!!

I ride a 65 Panhead on a stretched and lowered 57 frame. This little set of screws has made dropping the bowl on my S&S carb a breeze instead of a visit to ****!! I no longer have to lay on my back on the ground, (I am 67 years old), now I just sqwat down and with a Stanley 5/16", x 1/4" box end wrench number 7-86-874 I can not only EASILY remove the bowl, with the 1/4" end I can take the clamp off that holds the gas line on!! This little wrench slipped right into my tool box that is mounted to my rigid frame with no trouble at all. Who ever came up with this little set of screws shoul be made a Saint of the highest degree!! I will see you in the wind!!

Another quality product from Lowbrow

If you have a S&S shorty carb, you know that these extended float bowl screws are a must have to swap jets during any adjustments you need to do.

Ita a great Product.

Extended S&S bowl screws.

Haven’t put them into use yet, but I’m certain they will be great.

The only way to Screw a Float-Bowl...

Love the way these Float Bowl Screws makes working on the Carb. so much easier, especially while it is still bolted to the Bike.

Extended Float Bowl Screws For S&S G Carb

Worked perfect . Wish I had these 30years ago

S&S Should have thought of this

The screw by the accelerator pump was a little tight fitting. I didn't think it was the right size but just a little turn or two and it went right through the float bowl and up into the carburetor. These worked great but I'm a little concerned that they have no lock washers on them like the factory screws. I put a little Loktite on them. Hey S&S! I can't believe you guys didn't come up with this. After all these years and you're still using those tired old slotted head screws. C'mon guys. You should be embarrased that someone else had to come up with this.

Easy Access

These Bolts Are Sweet, Dropping The Float Bowl? Much Easier. I Like.

This should be an option when you buy the Carb.

Why the carb manufacturer doesn't offer this option is beyond me but I guess that's why there's an aftermarket. I'm putting together an R-2 S&S clone with a Thunder-Jet and when it comes time to tune this engine these easily removable bowl screws will pay for themselves several times over. Anyone who works on their own equipment should love these bowl screws. This might be my first purchase from Lowbrow but it won't be my last. So far I like everything about these guys.