Can I clamp exhaust pipes together?

Yes, you can clamp exhaust pipes together, but the vibration from the motorcycle may eventually cause the clamps to loosen. If you choose this route, be sure to check the tightness of the clamps after the first few rides, and every so often afterward, to avoid having issues while on the road.

Is it better to weld or clamp a motorcycle exhaust?

It is always better to weld exhaust together if there is no foreseen need for you to have access behind the exhaust, or if having it welded doesn't make it excessively difficult to remove the exhaust pipe. If you need to remove part of the exhaust from time-to-time to maintain your motorcycle, it may be better to clamp the exhaust so it can be easily removed. Mufflers are often clamped on, which is great if you want to change mufflers for style or sound purposes, as it as easy as loosening the clamps and slipping new mufflers into place.

How do I stop my Shovelhead exhaust pipes from coming loose?

If the exhaust pipes on your Harley Shovelhead keep coming loose, there are a few suggested solutions you can try, and one that will definitely work. Some of the solutions you can try would be to use a high-grade bolt and Loctite® to keep them in place. In some applications, this will be enough to keep everything from loosening up. Another permanent solution is to drill your bolts and safety wire them so they cannot back out. This is the same method used on race bikes to keep debris off the race track. Colony Machine also makes a Shovelhead locking exhaust bolt kit. This is a sure fire way to keep your exhaust from coming loose, as it is a mechanical locking system that stops the mounting bolt from being able to back out and loosen up.

How many mounts should my custom-made motorcycle exhaust have?

Typically, a custom motorcycle exhaust system will need to be mounted to the cylinders, and then have 2 -3 mounting points to the frame. You can have more mounts if needed, but usually 2 is sufficient to keep the exhaust in place. The main goal is to make sure the exhaust system is supported and not stressed by vibration derived from the road or the motorcycle. Lack of proper mounts can lead to the exhaust pipe cracking, or worse, it can cause undue stress on the head of the engine or exhaust spigot, depending on the design of the engine.

Motorcycle Exhaust Mounting Brackets & Hardware

Sort by

EMGO Finned Exhaust Pipe Clamps 23 Fins unit pre unit Triumph OEM # 70-4501 1950-1971
11 reviews $51.94

Gasbox Drag Pipe Mounting Kit - 1952-81 Harley-Davidson Ironhead Sportster
1 review $104.95

British Standard Stainless Steel Finned Exhaust Pipe Clamp 1950-1971 Triumph Unit & Pre-Unit OEM # 70-4501
3 reviews $99.99

Colony #2188-4 Exhaust Port Studs Kit 1986-Up Harley-Davidson XL 1999-Up Twin Cam
2 reviews $14.37 $15.13

Gasbox Front Exhaust Clamp 1958-1985 Harley-Davidson Sportster XL Models - Chrome OEM # 65514-58
3 reviews $17.50

Fiorucci Fabrications Weld-on Universal Exhaust Mounting Slides
$24.95

Gasbox Drag Pipe Exhaust Clamp for 1952 - 1985 Harley-Davidson XLR Models - Stainless Steel - OEM # 65513-53
1 review $15.00

British Standard Chrome Exhaust Mounting Brackets Triumph Motorcycles OEM # 70-6857
15 reviews $23.43

Lowbrow Customs Exhaust Spigot Adapters for 1972-up OIF Triumph Motorcycles
9 reviews $32.99

Cycle Standard Stainless Steel Exhaust Clamps 1-3/4 inch - Made in the USA
21 reviews $21.99

British Standard Exhaust Spigot 1963-1971 Triumph 650 Bonneville Tiger - Oversize
2 reviews $43.55

British Standard Exhaust Spigot 1963-1971 Triumph 650 Bonneville Tiger
$32.66

Colony #3308-6 Locking Exhaust Bolt Kit 1966 - 1984 Harley-Davidson Shovelhead
10 reviews $20.90 $22.00

Colony #3254-6 Exhaust Pipe Locking Bolt Mounting Kit 1966 - 1984 Harley-Davidson Shovelheads
11 reviews $20.90 $22.00

Gasbox Front Pipe Exhaust Clamp 2 Piece Set 1937-1969 Harley-Davidson EL FL - Parkerized OEM # 65512-37
3 reviews $20.00

Cycle Standard Stainless Steel Exhaust Clamps 1-1/2 inch - Made in the USA
10 reviews $21.99

Gasbox Shovelhead Exhaust Flanges - Mild Steel
10 reviews $21.95

Colony #2943-1 Boot Guard Parkerized OEM 11500-38 Harley-Davidson Knucklehead Flathead 1936-up
$86.13 $95.70

Gasbox Exhaust Port Clamps 1950 - 1965 Harley-Davidson Panhead - Stainless Steel OEM # 65519-48 HDW
5 reviews $28.50

Colony #3252-6 Locking Exhaust Pipe Bolt Kit 1966-84 Harley-Davidson Shovelhead
6 reviews $26.13 $27.50

Gasbox Exhaust Port Clamps 1952-1971 Harley-Davidson K and Sportster XL Models - Stainless Steel OEM # 65519-52
1 review $20.00

Gasbox Exhaust Port Clamp Set for 1952 - 1976 Harley-Davidson K and XL Models - Stainless Steel - OEM # 65519-52 HDW
1 review $28.50

EMGO Modern Triumph T100 T120 Bonneville Exhaust Muffler Adapters - Upswept
8 reviews $48.39

Bassani Xhaust 18mm x 1.5 O2 Sensor Port Plugs
7 reviews $11.95

Lowbrow Customs Rigid Frame Mounting Bracket for Shotgun Exhaust Pipes - 1990-03 Harley-Davidson Sportster XL
$9.99

Gasbox Rear Muffler Exhaust Clamp 1957-1976 Harley-Davidson FX and Sportster XL Models - Stainless Steel OEM # 65279-57
$19.95

Lowbrow Customs Replacement Mounting Bracket Shotgun Exhaust Pipes 1990-03 Harley-Davidson Sportster XL
1 review $29.99

Colony #3328-4 Zinc Plated Exhaust Port Nuts Harley-Davidson 1986-Up XL 1984-99 Big Twins 1999-Up Twin Cam OEM# 7593
13 reviews $4.84

Gasbox Front Pipe to Frame Clamp Set for 1958 - 1969 Harley-Davidson FL Models - Parkerized - OEM # 65513-58, 65512-37A
3 reviews $22.50

Gasbox Exhaust Port Clamps 1948-1965 Harley-Davidson Big Twin Models - Stainless Steel OEM # 65519-48
$20.00

Colony #2973-4 Spacers CAD Plated Harley-Davidson OEM 58102-49 FL FLH
3 reviews $10.89

Colony #3697-4 Exhaust Port Nuts - Zinc Plated - 1984-99 Harley-Davidson Big Twin 1986-Up XL 1999-Up Twin Cam
$4.40

Colony #3696-4 Exhaust Port Nuts - Chrome - 1984-99 Harley-Davidson Big Twin 1986-Up XL 1999-Up Twin Cam
$6.05

Colony #3467-3 Front Exhaust Pipe Port Clamp Bolt and Nut Kit 1965 Harley-Davidson FL FLH
$20.90 $22.00

Colony #3430-4 Front Exhaust Pipe Clamp Bolt and Spacer 1932-1936 Harley-Davidson VL
$10.59

Colony #3408-3 Muffler Center Clamp Bolt Kit 1932-36 Harley-Davidson VL OEM# 1032-32 0123
$11.80

Colony #3366-4 Brass Exhaust Port Nuts Harley-Davidson 1986-Up XL 1984-99 Big Twins 1999-Up Twin Cam OEM# 7593
5 reviews $12.10

Colony #3283-6 Muffler Stud Mounting Kit 1959 - 1970 Harley-Davidson Sportster XLCH OEM# 65330-59
1 review $16.72 $17.60

Gasbox Exhaust Clamp 4 Piece Set 1947 - 1957 Harley-Davidson Panhead - Parkerized OEM # 47-57 CL HDW
$49.95

Colony 3279-22 Parkerized Exhaust System Mounting Kit 1941 - 1947 Harley-Davidson Knucklehead Panhead Big Twins
$19.86 $20.90

Colony #3165-4 Muffler Mount Spacers 1979 - 1984 Harley-Davidson FL FLH OEM 57089-71
1 review $10.89

Gasbox UL Front Pipe to Frame Clamp 2 piece Set 1936-48 UL Harley- Davidson - Parkerized OEM # 65511-36
1 review $20.00

Colony #2216-18 Exhaust System Mounting Bolt Kit 1932 - 1973 Harley-Davidson 45's
2 reviews $16.72 $17.60

Colony #3078-18 Exhaust System Chrome Mounting Bolt Kit Harley 45s 32-73
$22.47 $23.65

Colony #3077-18 Exhaust System Parkerized Mounting Bolt Kit Harley 45s 32-73
$16.72 $17.60

Colony #2577-1 Boot Guard OEM 11500-38 Harley-Davidson Knucklehead Flathead 1936-up
$89.10 $99.00

Colony #2719-22 Exhaust System Mounting Bolt Kit Chrome Harley Knucklehead Panhead 1941-57
$21.95 $23.10

Colony #2772-22 Exhaust System Mounting Bolt Kit Parkerized Harley Knucklehead Panhead 41-57
1 review $19.86 $20.90

Bassani Xhaust 02 Port Bushing Adapters
12 reviews $11.95

Colony #9209-1 Exhaust Pipe Nipple Harley 74 & 61 Twins 1924-29 OEM 1012-25
$44.72 $47.07

Colony #9210-1 Exhaust Pipe Nut Harley 75 1921-24 Harley 61 & 74 1925-29 Nickle plated OEM 1014-21
$26.84 $28.25

STAY CONNECTED
WITH LOWBROW

NO SPAM, EVER. JUST GREAT STUFF. YOUR INFO IS NEVER SHARED.