Does straight pipe exhaust add horsepower to motorcycle?

It depends on what you are starting with and what your motor setup is. For most typical street setups where you are running a modified engine made to be run on the street, your best performance option is usually going to be a 2 into 1 exhaust system. These systems help balance out the pressure on V-Twin applications producing the right amount of back pressure your engine needs to perform. If you are running a heavily modified engine made for racing, then a straight pipe exhaust system may be a good option. Typically, a straight pipe exhaust system will add horsepower over your average stock exhaust system.

Does exhaust pipe length affect sound?

Yes, Shorter exhaust pipes are usually much louder than longer pipes. As the sound waves travel through an exhaust pipe, the sound waves bounce off the inside of the pipe. This means the sound waves become less powerful when they run into an obstacle. The more deflection there is, the quieter the sound waves will get. The longer exhaust pipes will make the exhaust quieter and typically lower the tone of the exhaust note.

If I have problems during installation, what is the best way to get technical help?

There are few ways you can obtain help with an installation. First option is to check out the motorcycle how-to videos on our blog. We spend a lot of time and effort to create how to videos that will walk you through many of the installation procedures step-by-step. We also offer free motorcycle technical support for our customers. If you are installing a part you purchased from Lowbrow Customs, send us a message or just call us at 1-800-935-5050. We will be happy to help you through your installation process! Finally, for those of us who are a little on the non-social side, you can also text us at 1-800-935-5050. Just be sure to include all the details needed for us to help you with your issue.

What diameter exhaust piping should I use? Is bigger tubing always better?

Bigger tubing is not always better. First it will change the sound of your exhaust, wider motorcycle exhaust tubing tends to be louder but with a lower tone. If you don’t modify your bank so you can bring more air in, you don’t really get a benefit for adding more air going out. Typically, it is the best practice to stick with the same size tubing your motorcycle came with unless you are planning to are a considerable amount of displacement to your cylinders. Your engine was developed to run with the stock diameter exhaust. It’s usually best to use that diameter exhaust even if you are doing some street modifications to your bike.

What’s Lowbrow Customs' best performing pipe? Loudest?

The best performing pipe we sell depends on the bike that the pipe is being installed on. Typically, a 2 into 1 pipe will provide the best performance for most applications. If your bike has a multitude of significant engine modifications such as a big bore kit, high compression pistons or a performance Harley cam, then a straight pipe exhaust system may have a slight performance advantage. A shorter pipe will be louder than a long pipe. It is important to remember that a loud pipe does not necessarily mean better performance.

Raw Motorcycle Exhaust Pipes

Sort by

Gasbox Shovelhead Exhaust Pipe Set 2-into-1 for 1970-84 Harley Cone - Bare Steel OEM # 65435-70
24 reviews $214.99

V-Factor Motorcycle Parts DIY 1-3/4 inch Builder Exhaust Kit - for your Chopper Bobber or Cafe Build
16 reviews $166.95

Lowbrow Customs Shotgun Exhaust Pipes 1990-2003 Harley-Davidson Sportster XL - Raw Steel
4 reviews $291.19

British Standard Triumph Upswept Drag Exhaust Pipes - Bare Steel
7 reviews $268.15

Lowbrow Customs Shotgun Exhaust Pipes 2004-2021 Harley-Davidson Sportster XL - Raw Steel
1 review $291.19

Gasbox Exhaust Pipe Set 1966-1969 Harley-Davidson Generator Shovelhead FL FLH 74 ci - Bare Steel
$249.99

Gasbox XLR Drag Pipe Set fits 1957 - 1980 (except 1979) Harley-Davidson Sportster XL XLH XLCH XLR Models - Bare Steel OEM # 65487-59
9 reviews $199.99

Gasbox Panhead Exhaust Pipe Set 1958-1964 Harley-Davidson Swingarm FL FLH 74 ci - Bare Steel
1 review $239.95

Gasbox Front Exhaust Pipe 1966-1969 Harley-Davidson Shovelhead - Bare Steel - OEM# 65443-66
1 review $65.00

Gasbox Front Exhaust Pipe 1948-1965 Harley-Davidson Panhead - Bare Steel - OEM# 65440-48
$60.00

Gasbox Y-Pipe Exhaust Pipe 1941-1957 Factory Rigid Harley-Davidson Models - Bare Steel OEM # 65505-41
2 reviews $59.95

STAY CONNECTED
WITH LOWBROW

NO SPAM, EVER. JUST GREAT STUFF. YOUR INFO IS NEVER SHARED.