Is bleeding the brakes difficult after installing a new master cylinder? Any tips?

It can be tricky and requires patience. A tip is to use a vacuum bleeder tool, which makes pulling air out of the system much easier. If you don't have one, the traditional "pump and hold" method works well. Always ensure the reservoir never runs dry during the process.

What type of brake fluid should I use (DOT 3, 4, or 5)? Can I mix them?

NEVER mix DOT 5 (silicone-based) fluid with DOT 3 or DOT 4 (glycol-based) fluids. They are chemically incompatible and will ruin your entire brake system. Always check your old master cylinder cap or service manual for the recommended fluid type and stick with it.

I've installed a new master cylinder, but my brake pedal still feels spongy. What else should I check?

If you are certain all the air is bled out, the next most common culprit is an old rubber brake line. Old lines can flex and bulge under pressure, causing a spongy feel. Consider upgrading to a braided steel line. Also, check that your brake caliper piston is not seized.

Chrome Motorcycle Rear Master Cylinders

Sort by

Cycle Standard Wagner Lockheed Type Rear Disc Brake Master Cylinder - Chrome - 1973-E1979 Harley-Davidson FL/FX
$99.84

Cycle Standard Solo Custom Mini Rear Brake Master Cylinder Assembly - Chrome
$175.29

Cycle Standard Wagner Lockheed Type Rear Drum Brake Master Cylinder - Chrome - 1958-1972 Harley-Davidson FL 1971-1972 FX
$99.84

Mid-USA Rear Master Cylinder - 1987-2003 Harley-Davidson Sportster - Replaces OEM 42456-87C
15 reviews $112.70

STAY CONNECTED
WITH LOWBROW

NO SPAM, EVER. JUST GREAT STUFF. YOUR INFO IS NEVER SHARED.