Cool

Picture Update of shifter bend.

jockey shifter

Cool little item. Had to heat and bend some to clear my coil setup, no issue. My bike is an aftermarket build "Ultra Groundpounder" some things on this scoot are like that.

Fixed it.

Learning experience, no directions but a high quality part. The part can be installed for many different applications, depending on user need and year, make and model of bike or trike. The part specifically targets harley davidson. A universal part! Mild modifications allowed.

Shifter worked great, needed slight modification to fit my 03 dyna, but once moved looks and works perfectly.

Shovelhead chopper

This shifter is just what I wanted for my build

Just what I needed and arrived perfectly

Much better

I removed another company’s shifter to install this one an am much more satisfied. My old shifter was of good quality but the look was way over the top. It mounted from the top motor mount and had linkage to the trans. It was easy to reach but way to many parts to wear out and again the look. My motorbike is a rider and that piece was a look at me. This unit works and is minimum. I like it.

Jockey shift

Needed to look cool as f*ck

Worked very well!

Had to modify slightly by removing some material rom under the upper hole where the bolt goes into the stock shift lever, when pulling the shifter back it would hit the very corner of the primary case. It would also be nice if the shifter had a 45 degree bend in it towards the rear and was an inch or so longer. Installed on a Santee hard tail frame with an evo, stock primary and 5spd... all and all great bolt on product

Looks cool, had to modify

I dig it and it saved me a bunch of time making it, but it didn’t fit with the coil cover. Had to heat it up and bend it. I also thought it would look better if it matched the engine so I painted it.

Great lever

Installed easy and looks good

Good News

It fit nicely on my baker 6 into 4 with the supplied spacer.